Table of Contents
Alarms and Door Access
Where a site has an alarm panel or door access control connected to TetherX, what they report appears beside your camera footage, so one screen tells the whole story. This page follows the order of the getting-started email and links to the guide for each part.
Connect a Panel or Door System
| What you want | Guide |
|---|---|
| Choose how a panel connects | Alarm Panel Integration |
| Receive alarm signals from a compatible panel or IP communicator | Alarm Signal Receiving |
| Connect a Texecom panel directly | Texecom Integration |
| Connect Paxton Net2 door access control | Paxton Net2 Integration |
Arm and Disarm
The virtual keypad on a Texecom panel connected by serial lets you arm, disarm and control the alarm remotely through TetherX. See Texecom Integration. Whether you see the controls depends on your account.
Panel and Door Events
- Alarm Signal Receiving explains what an operator sees when an alarm arrives.
- SIA Event Codes lists the alarm event codes TetherX supports, and SIA Decoding explains how incoming messages are read.
- Paxton Net2 Integration explains how to review door access events on the Access page and link each door to a camera zone.
Control Room
- Professional Monitoring explains what a professionally monitored site gets.
- Control Rooms explains how control room operations work in TetherX.
- Monitored Hours explains when a monitored site is watched.
Open a Door Remotely
Paxton Net2 Integration explains how to open a door remotely from the Access Control Units tab, once you have confirmed it is the intended door.
Related Articles
- Notifications - Choose which alarms reach you, and arm or disarm a site or camera
- User Guide - Find a guide for every feature